accelerometer vibration measurement

Our accelerometers measure vibration on rotating machinery, structural elements, and field test setups. The sensing element inside is a piezoelectric crystal that generates an electrical signal proportional to the vibration acceleration. Sensitivity options typically range from 100 mV/g for general-purpose diagnostics up to 500 mV/g for low-level vibration. Frequency response covers from 0.5 Hz to over 10 kHz, so you can detect slow structural oscillations and early bearing faults with the same instrument if needed. The compact stainless-steel housing works in harsh environments—dust, moisture, and temperature swings don’t easily throw off readings. Installation is straightforward with threaded studs, magnetic bases, or adhesive mounts. For permanent monitoring, we often supply units with integrated cables and signal conditioning to minimize wiring hassle on site. If your application involves multi-axis motion, one triaxial sensor can replace three single-axis units, reducing mounting complexity. Data typically feeds into a portable collector, PLC, or vibration transmitter. We also help teams that need to interface with older monitoring systems by configuring the correct output type—IEPE or charge mode—and supplying matching cables. Many of our sensors ship from stock, but long-term projects can be supplied in stages to match your construction or maintenance schedule. If you’re unsure whether to choose a low-noise sensor for early failure detection or a high-temperature unit for turbine monitoring, get in touch and we’ll walk you through the options.